[問題] 買左個SEAGATE SATA II 250GB

[choppy]

BIOS已經認到250GB,但系安裝WIN2000時,只系認到130GB......有冇辦法呢??

[pazu]

http://shopping.pchome.com.tw/hd/feature2.php?fid=272

# ■發生原因：
# A. 您主機板上的BIOS不支援48bit定址的bigLBA模式。
# B. 目前支援137GB以上硬碟(48bit LBA)的作業系統，僅有Windows 2000 SP3版本以上，或Windows XP SP1版本以上。Windows 95、98、ME或Windows 2000 SP1/SP2、Windows XP Home/Professional原始版本，均不支援超過137GB的硬碟容量。《警告》如果硬碟內已經具有超過137GB的磁碟分割區 (Partition)，資料可能無法正常讀取/寫入。超過137GB的磁碟分割區，則無法被讀取。
# C. 作業系統版本不符合需求(請參閱B項)，或版本符合需求，但系統預設並未開啟bigLBA支援。
# D. 作業系統版本不符合需求(請參閱B項)，或版本符合需求，但系統預設並未開啟bigLBA支援。

[貓丁]

Reg48bitLBA for Windows XP SP1 and Windows 2000 SP3
Windows XP Service Pack 1 and Windows 2000 Service Pack 3 operating systems, or higher, are required to support ATA disc drives larger than 137GB. The registry setting EnableBigLBA needs to be set after the proper level service pack is installed.

If you use the traditional Microsoft Disk Administrator or Disk Management tools to prepare your drive or you need to check the status of the EnableBigLBA registry setting, you can use the Ontrack Reg48bitLBA utility to set or confirm if the setting is enabled.

http://www.seagate.com/support/disc/dow ... it_lba.exe

from : http://www.seagate.com/support/disc/utils.html

[choppy]

真系唔該哂 PAZU!!!!!!!!!!!!!!^_^

[supercat7xx]

如果主機板支援有NCQ硬碟,而硬碟也有NCQ的,那麼WIN2K能否運行NCQ?

[choppy]

Reg48bitLBA for Windows XP SP1 and Windows 2000 SP3
Windows XP Service Pack 1 and Windows 2000 Service Pack 3 operating systems, or higher, are required to support ATA disc drives larger than 137GB. The registry setting EnableBigLBA needs to be set after the proper level service pack is installed.

If you use the traditional Microsoft Disk Administrator or Disk Management tools to prepare your drive or you need to check the status of the EnableBigLBA registry setting, you can use the Ontrack Reg48bitLBA utility to set or confirm if the setting is enabled.

http://www.seagate.com/support/disc/dow ... it_lba.exe

from : http://www.seagate.com/support/disc/utils.html

感謝!!!