給大家砌一部 CG電腦一些config資料...

[Cyber Oxygen]

Dual Cpu config

CPU : Athlon MP 1800+ 2 粒
MotherBroad:Tyan TIGER MPX (S2466N)
Ram: PC2100 512MB RAM 2 條
Display card : 3D Labs Oxygen VX1 32MB SDRAM
Hard Disk : IBM 80GB 7200 rpm 2 個
Raid Card: Promise FastTrak TX2000 RAID 0 , 1, 0+1
DVD Rom : Panasonic 16x DVD-ROM
CD-RW: Lite-on 32X CDRW
Sound Card: Creative LIVE SB 5.1DB
Lan card and Floppy Driver
Case & ATX Power Supply

about $11000 without Monitor

Single CPU

CPU : Intel P4 2.0G
MotherBroad:Intel 845G chipset motherbroad
Ram: PC2100 256MB RAM 2 條
Display card : 3D Labs Oxygen VX1 32MB SDRAM
Hard Disk : IBM 80GB 7200 rpm 1 個
CD-RW: Lite-on 32X CDRW
Sound Card: Onbroad
Lan card : on Broad
Floppy driver
Case & ATX Power Supply

about $7000 without Monitor

CRT Monitor : Philips 107T , $1160
Samsung 753DF, $1056
Sony CPD-G220 $2560

[h2o]

VX1 does not support particle & video very well. (flickering at high resolution movie, eg. 540 x 432)

If u have money, change it to GVX1 Pro.

GVX1-Pro 1.5v AGP optimized for P4 US$849
GVX1-Pro 3.3v AGP US$519
VX1 1.5v AGP compatible with P4 US$129

Don't just recommend 17" monitors. THe price of 19" monitors are acceptable now.

Philips 109P (1280x1024 at 104Hz, with BNC & USB hub) HK$3,990
Sony CPD-G420 (1280x1024 at 85Hz, dual input, I don't know is it include BNC & USB hub) HK$4,390

[rryria]

我想要dual呀!!!
如果張display系quadro4仲正!!!

[h2o]

Elsa GLoria4 900XGL 128MB dual output HK$11,000
Elsa GLoria4 750XGL 128MB HK$ 6,600

[zaptos]

Elsa?? Still exist?? Beware of the support.
PNY Technology seems to take over the production of Quadro 4 graphics cards according to Nvidia web info.

[choppy]

如果系wildcat系列系最正!!!

[Cyber Oxygen]

大家或者等下3d labs 張新咭........
買Elsa GLoria4 都冇問題
都是用公版driver....

用19 吋Monitor 好痛苦(對眼)...
基本上唔用Softimage 的話，17 吋就ok
買sony G420 的話加幾百就可以買到17吋LCD
雖然顏色未必准...

[魚魚]

P10 SYSTEM 本身都唔平
由 $499 至 $1xxx 美金
http://www.3dlabs.com/product/wildcatvp/index.htm

大家或者等下3d labs 張新咭........
買Elsa GLoria4 都冇問題
都是用公版driver....

用19 吋Monitor 好痛苦(對眼)...
基本上唔用Softimage 的話，17 吋就ok
買sony G420 的話加幾百就可以買到17吋LCD
雖然顏色未必准...

[h2o]

I have 19" monitor at home & use 21" monitor at office

When u use 3d or composite softwares, u find that 17" monitor is not enough.
Especially for the modeler, they always need four windows to build model.

[Siegfried]

I'm still using a config like U guys listed above but I added Ultra wide SCSI controller and Hard-disk, any comment on this choice?

[Cyber Oxygen]

What resoultion u use?

1600x 1200 ?

the icon will be very small...

[Cyber Oxygen]

Raid Card

Adaptec SCSI RAID ARO-1130U2
Interface: U2-SCSI
Max. Transfer Rate: 80MB/s
Cache: 2MB
$2,150(box)

Adaptec SCSI RAID 2100S
Interface :Ultra 160
Max. Transfer Rate :160MB/s
Cache: 32MB
$3,450 (box)
$2,980 (bulk)

all support
0/1/0+1/5 mode


SCSI Harddisk

Maxtor ORCA 160 SCSI 36G
Capacity :36GB
Rotation Speed :10000rpm
Interface :Ultra 160
Cache :8MB
$2300

IBM IC35L036UWD210
Capacity :36GB
Rotation Speed: 10000rpm
Interface :Ultra 160
$2000

[Cyber Oxygen]

P10 SYSTEM 本身都唔平
由 $499 至 $1xxx 美金
http://www.3dlabs.com/product/wildcatvp/index.htm

如果有得選擇 3d labs P10 SYSTEM 和 nvidia Quadro 4

我會選擇用3d labs 的咭..

[choppy]

如果用$50000元砌一部用尼玩3d既機,你會怎樣砌??
p.s...........monitor已備,要用intel cpu和3dlabs的卡.
只需要必須既零件!!

[zaptos]

The fastest display card in the planet wildCat III 6210 as claimed by 3DLabs. It will eat half of your budget. Awaiting the 8310...with radio. Just kidding.