Maya cannot support Q9450?

[h2o]

同一個 scene, 用 8 粒 xeon 可以 render 用盡 cpu usage 100%, 但去 Q9450 部機 render 只得 50%

我手上既 job 系 mental ray render + maya 2008 sp1 + windows xp 64bit


Q9450 用 gigabyte x48 motherboard, 遲d 會試埋 update BIOS

睇下有冇人有 same problem.... 我過多幾日會再試多幾個 setting, 到時同大家分享咩問題

[flyws]

！咁大鑊，我都考慮買Q9450，依家要睇定?先。不如用Q6600，平成近千喎！

[stantang]

I'm thinking about getting a new PC with Q9450 too... would it be due to the fact that X48 is not officially supported yet? just guessing

[h2o]

你地照砌左先啦

試下用 asus 其他板..... 咩 p35, x38 lor (其實我最唔熟就系 motherboard 既野)

[moc]

靚仔呀...
如果你用的是XP系統...
可以試試...找找....網路上專俾dual core CPU的更新Patch....


Intel及AMD都有自己獨立的Patch....
我早前買左部新NB...用緊T8300 CPU...用佢來Render野...我發現用唔過50%CPU使用量.....速度也有差距...


後來安裝左那兩個Patch再..按指示...更改了點regedit...
發現算圖時間....快左好多...同一個場景快左超過25%...

[h2o]

上網都見有人用 3d max 都有一樣既問題.....

但系 gigabyte 喺 64 bit windows 唔可以 refresh BIOS (asus 系可以), 要用 dos.... 仲摸緊點做

[kuykuy]

上網都見有人用 3d max 都有一樣既問題.....

但系 gigabyte 喺 64 bit windows 唔可以 refresh BIOS (asus 系可以), 要用 dos.... 仲摸緊點做

用dos要入floopy喎,
將download下來的file爆開, save至floopy,
boot入dos, 再行返floopy個program, update新bios, 完成

[h2o]

我d 機冇裝 floppy drive 架.......

[stantang]

Get a USB floppy drive la, save a lot of headache.

[stantang]

Just want to update everyone that Q9450 is working fine with Asus P5K motherboard. Both Maya software and MR render can use 100% cpu.

The setting is:
Maya 2008 64bit Ext. 2
XP x64 SP2
Asus P5K-E
6gb ram

[h2o]

我 update 哂所有野都 ok la, 只系 motherboard 唔夾 ram, down 左.

gigabyte 真系唔掂

[ed209]

"只系 motherboard 唔夾 ram", 但系反而系影響咗cpu 行唔到100% 咁有型?

mobo 同ram 問題, 咁其他行threading 既野 壓片之類既咪全部都行唔到 100%? 好大鑊喎. 我蝕底d 兩舊水同你要曬

[Andrew Lee]

我部新機都系 Q9450 , resolutio 大少少都 ren 吾到, 吾知關吾關事

[stantang]

Andrew, are you using XP 32bit? How much Ram do you have?

[Andrew Lee]

普通果只 window XP lor, 系咪即系 32 bit 呀? 我有 4 GB ram