骨架不能作上下移動

[greenhead]

我做的骨架能左右及旋轉移動，但卻不能上下移動。
請前輩替我看看那處出錯，謝謝。

[evildarkfalcon]

你用個 骨架 較野個度有個上下同左右既箭咀嫁...

你個five 開唔到呢..

謝謝.

[greenhead]

你用個 骨架 較野個度有個上下同左右既箭咀嫁...

你個five 開唔到呢..

謝謝.

這個flie要解壓的，我的骨架就是在這裡也不能動。

[sobig]

我dl左, 試過, move到woo師傅.
有圖為證
用evildarkfalcon既方法就得
make sure你select左 bip01先move

[greenhead]

我dl左, 試過, move到woo師傅.
有圖為證
用evildarkfalcon既方法就得
make sure你select左 bip01先move

謝謝sobig大回覆，
唔通系我3dsmax有問題......上下移動唔到...

[greenhead]

還有一個問題，
我將有skin的模型merge進另外一個file後skin的拉力都會出問題，跟原先set好的改變了。

[sobig]

that is relating to your scale of sence.
make sure those sences are same scale/unit.

[sobig]

我dl左, 試過, move到woo師傅.
有圖為證
用evildarkfalcon既方法就得
make sure你select左 bip01先move

謝謝sobig大回覆，
唔通系我3dsmax有問題......上下移動唔到...

so how can you do your motion now?
u cannot move the bipad

[greenhead]

我dl左, 試過, move到woo師傅.
有圖為證
用evildarkfalcon既方法就得
make sure你select左 bip01先move

謝謝sobig大回覆，
唔通系我3dsmax有問題......上下移動唔到...

so how can you do your motion now?
u cannot move the bipad

向Ｙ軸及Ｘ軸移動也可以，但Ｚ軸就不能動

[greenhead]

that is relating to your scale of sence.
make sure those sences are same scale/unit.

我有兩個file分別是1unit=1000cm及1unit=1000inches
應該怎樣解決呢?

[sobig]

that is relating to your scale of sence.
make sure those sences are same scale/unit.

我有兩個file分別是1unit=1000cm及1unit=1000inches
應該怎樣解決呢?

that why i told u the issue of scale.
next time, you make sure to get the same scale in two sences.
all senses should be 1 Unit = 1.0 Meters, used International Units.
and. your bipad height supposed to be 1.5 m.

wish this help

[greenhead]

問題已解決了，謝謝sobig兄。